PRODUCTS CENTER
solomon islands Guide Strips CCGS
Product Description
Product presentation
- CCGS and CCGSM guide strips are precision-ground wear rails that keep the moving plates of a plastic injection mold aligned — square, parallel and free of binding — through hundreds of thousands of cycles. They are machined from oil-hardened steel and hardened to 52–56 HRC, then ground to a 0/−0.01 mm cross-section tolerance so they seat flat against the mold base and hold their clearance over the life of the tool.
- Every strip carries machined 90° oil grooves on both faces, the classic lubricant-retention pattern that keeps a film of grease on the sliding face and channels wear debris out of the contact zone. Three standard hole layouts are available — Typ-A, Typ-B and Typ-C
Guide Strips：
Guide Strip is a common mold wearing part used for punch and injection molds. It is installed on the matching face of sliders and mold bases to undertake friction load, protect the mold base material from wear, maintain sliding precision and simplify later part replacement and maintenance.
CCGS
| Material | Oil steel 52-56HRC |
|---|---|
| Standard | JIS |
| Size | Depends on you drawing or products standard |
| Advantage | High internal toughness,not easy to break under impact |
ADDRESS
805,Anxin building,Shanmen Community,Yan luo Street,Bao'an District,Shenzhen
Hetianxia Industrial Zone,Dongguan City,Guangdong Province.
119/25 Village No.2, Nong Bon Daeng Subdistrict, Ban Bueng District, Chonburi Province
20170 Thailand.
Leave a Message
SOCIAL MEDIA
Copyright © 2023 Shenzhen HYD Industry Co., LTD
business license
