Precision machining process flow
Release time:
2024-02-22 11:21
1. Prepare:First of all, it is necessary to choose the right material and strictly control its quality. Secondly, according to the processing requirements and material characteristics, select the right machine tool and tool , as well as the right cutting tool , fixture and auxiliary device , to ensure the processing accuracy and efficiency.
2. Organization and processing:According to the processing requirements and material characteristics, the processing sequence is organized, including cutting , roughing , finishing, heat treatment and surface treatment.
3. Processing operation: After the precision machinery parts are processed, it is necessary to carry out quality testing on the parts to check whether the processing accuracy, surface finish, hardness and other indicators meet the requirements.
4. Test the quality:Commonly used testing methods include measurement, microscopic observation, hardness testing, etc.
5. Surface treatment The surface of the parts are treated, including rust removal, polishing, painting, etc., so that the surface of the parts can achieve a certain finish and anti-corrosion effect, in order to improve the service life and beauty of the parts.
In addition, in the process of precision machining, there are also some key principles to consider, such as finishing , first surface and then hole, dividing the processing stage and benchmark first.
RELATED NEWS
GGR Series Guide Strips: Grooved Wear Guide Solutions for Mold Sliding Mechanisms
GGR series guide strips are made of oil steel with 52-56HRC hardness, equipped with wavy oil grooves and 3 types of mounting structures. They provide stable lateral guiding and wear protection for mold sliders, suitable for long-cycle mass production scenarios of injection and stamping molds.
Wear Plates SSAS & SSASM: Optimize Sliding Wear Resistance for Long Mold Lifespan
SSAS and SSASM mold wear plates are made of oil steel with hardness of 52-56HRC. The oil-groove structure of SSASM realizes sustained lubrication, effectively reducing slider friction loss, which is ideal for mass production of injection molds and stamping dies.
Self-Lubricating Wedge Blocks Cut Mold Downtime
Brass-graphite inclined wedges eliminate greasing, reduce slide wear, and keep molds running without unplanned stops.
How Square Interlocks Improve Mold Alignment and Production Consistency
Square interlocks keep mold halves in perfect position during injection molding. They reduce defects, protect mold surfaces, and shorten setup time.
Slide Retainers for Precision Mold Positioning
Slide retainers made from alloy steel 8407 (40-45HRC) secure mold slides in position, prevent part defects, and support custom specifications for various mold bases and resin types.
Ejector Pin Selection Guide for Plastic Molds: 3 Key Details to Avoid 80% of Production Failures
Ejector pins are core components of plastic molds. Improper selection often causes issues like ejection marks, cracking, stuck molds, and directly impacts product yield and mold lifespan. This article breaks down key points for ejector pin selection, helping you avoid common pitfalls and improve production stability.
ADDRESS
805,Anxin building,Shanmen Community,Yan luo Street,Bao'an District,Shenzhen
Hetianxia Industrial Zone,Dongguan City,Guangdong Province.
119/25 Village No.2, Nong Bon Daeng Subdistrict, Ban Bueng District, Chonburi Province
20170 Thailand.
Leave a Message
SOCIAL MEDIA
Copyright © 2023 Shenzhen HYD Industry Co., LTD
