Two color injection molding process advantages
Release time:
2024-02-22 11:57
1. Save costs
The two-color injection molding process can complete the color conversion in the same mold, avoiding the use of several different colors of injection molds, thereby reducing tool costs and footprint. At the same time, because only one injection machine is needed, the equipment cost on the production line can be saved.
2. Improve production efficiency
The two-color injection molding process uses special molds and injection machines, which can automate the complete injection cycle process, greatly improving production efficiency and saving human resources.
3. Reduce pollution
The two-color injection molding process does not require the plastic sheet to be externally dyed or coated, so it can reduce the use of harmful chemicals, reduce the amount of pollution and waste emitted during the production process, and play a positive role in environmental protection.
4. Improve product quality
The two-color injection molding process can make the product look more beautiful, the design is more flexible, and it is suitable for a variety of different product fields, so it is widely used. In addition, the two-color injection molding process does not require manual coating or film processing, effectively improving product quality and production efficiency.
RELATED NEWS
GGR Series Guide Strips: Grooved Wear Guide Solutions for Mold Sliding Mechanisms
GGR series guide strips are made of oil steel with 52-56HRC hardness, equipped with wavy oil grooves and 3 types of mounting structures. They provide stable lateral guiding and wear protection for mold sliders, suitable for long-cycle mass production scenarios of injection and stamping molds.
Wear Plates SSAS & SSASM: Optimize Sliding Wear Resistance for Long Mold Lifespan
SSAS and SSASM mold wear plates are made of oil steel with hardness of 52-56HRC. The oil-groove structure of SSASM realizes sustained lubrication, effectively reducing slider friction loss, which is ideal for mass production of injection molds and stamping dies.
Self-Lubricating Wedge Blocks Cut Mold Downtime
Brass-graphite inclined wedges eliminate greasing, reduce slide wear, and keep molds running without unplanned stops.
How Square Interlocks Improve Mold Alignment and Production Consistency
Square interlocks keep mold halves in perfect position during injection molding. They reduce defects, protect mold surfaces, and shorten setup time.
Slide Retainers for Precision Mold Positioning
Slide retainers made from alloy steel 8407 (40-45HRC) secure mold slides in position, prevent part defects, and support custom specifications for various mold bases and resin types.
Ejector Pin Selection Guide for Plastic Molds: 3 Key Details to Avoid 80% of Production Failures
Ejector pins are core components of plastic molds. Improper selection often causes issues like ejection marks, cracking, stuck molds, and directly impacts product yield and mold lifespan. This article breaks down key points for ejector pin selection, helping you avoid common pitfalls and improve production stability.
ADDRESS
805,Anxin building,Shanmen Community,Yan luo Street,Bao'an District,Shenzhen
Hetianxia Industrial Zone,Dongguan City,Guangdong Province.
119/25 Village No.2, Nong Bon Daeng Subdistrict, Ban Bueng District, Chonburi Province
20170 Thailand.
Leave a Message
SOCIAL MEDIA
Copyright © 2023 Shenzhen HYD Industry Co., LTD
